2014/04/20

Detached curvilinear shock wave

I would like to first introduce the concept of homoenergetic flow (stationary). In such flows, we have.
Similarly, the flow is homoentropic if. Thus when the flow is homoentropic then the entropy is uniformly distributed in the flow domain. (see in yellow on the figure)

If the flow is homoenergetic and homoentropic, it is automatically barotropic and the Bernoulli constant CB in global. (In 2D flows, it implies that the velocity field is potential, since , they are perpendicular to each other, therefore.

Now, having all these, we can write the Crocco equation:
According to the Crocco equation, any inhomogeneity in the spatial distribution of entropy in the homoenergetic flow immediately leads to vorticity generation.

In the figure you may see the detached shock wave generated at the wedge. The flow in the neighborhood of a nose tip is subsonic (M<1) and then after the intersection of the dashed lines it become supersonic (M>1). 

The value of θmax is an increasing function of Mach number M1. Hence, at the flow around a concave fixed angle θ or the wedge with a fixed apex angle , a detached shock wave with increasing free-stream Mach number at critical M1* will arise. (Detached shock wave arising in a supersonic gas flow.) Further increasing M1, the distance between the detached shock wave and the body as well as the subsonic flow region will increase.

In the region where the shock wave is strong, the constant entropy curves have a larger value than further distance from the apex of the wedge, where the shock is weak. (this assumption is given on the figure)


Reference: Foundations of Fluid Mechanics with Applications - Sergey P. Kiselev, Evgenii Vorozhtsov, Vasily M. Fomin

Peter Deak

2014/04/06

Elastohydrodynamic lubrication

As we all know, bearings can roll, slide or do both simultaneously, therefore lubrication is essential in any bearing to reduce friction (thus wear) and remove heat.

maxxtorque.com
Elastohydrodynamic, is one of the types of the Full-Film Lubrication. In this type, the contacting surfaces are nonconforming (the gear teeth, cam and follower), then it is more difficult to form a full-film of lubricant, since the nonconforming surfaces tend to expel rather than entrap the fluid. 
  • At low speed these joints will be in boundary lubrication, and high wear rates can result with possible scuffing and scoring. 
  • The load creates a contact patch from the elastic deflections of the surfaces.
  • This small contact patch can provide enough of a flat surface to allow a full hydrodynamic film to form if the relative sliding velocity is high enough.

This is all I wanted to tell about such a kind of lubrication. The name itself is really scary-sounding, but not that strange if you know what it means. 



Reference: Machine Design An Integrated Approach, 4th edition - Robert L. Norton

Peter Deak